Yongnuo YN622C/YN622C-TX Wireless Flash Trigger Controller Kit for Canon
Couldn't load pickup availability
- 12 Month Warranty*
- Click & Collect (Sydney)
- Same Day Dispatch*
- Friendly & Expert Advice
- 100% Australian Stock
- 7 Day Exchanges*
This product adopts flexible LCD menu control, supporting mixed use of the A/B/C three groups of flashes using i-TTL, manua, or super sync flash mode, can be adjusted the exposure compensation or flash output of each group. In addition, it supports setting different focal length(zoom)of the three groups of flash, the remote-controlled distance can reach 100M, supporting seven wireless channels and A/B/C three groups, and equipped with the AF-assist beam emitter. Support USB firmware upgrade.
- LCD screen display, multi-buttons quick operation
- The firmware can be upgraded through the USB interface
- Support wireless shutter release function
- The focal length(zoom)of the A/B/C three groups of flash can be adjusted separately
- Equipped with the AF focus assist light (can be disabled)
- Grouping flash mode: i-TTL/Manual flash/Super sync
- Supporting mixed use of the A/B/C three groups of flashes with i-TTL, Manual flash, or Super sync flash mode
- The exposure compensation or flash output of A/B/C three groups of flashes can be adjusted separately
- Shutter Sync: first curtain sync, second curtain sync and FP high-speed sync, the highest sync speed is 1/8000s
- Support exposure compensation, flash value lock function(FVL)
- Support simulate (modeling) flash, red-eye reduction flash
- Support the flash zooming (auto)
- Super Sync (SS) time delay adjustment, for higher x-sync speed than the camera allows
- Settings saved automatically
- The flash sync signal can be input through the PC port
- Support the basic flash trigger (max sync speed is 1/250s) of standard hot shoe (non Canon body)
- *The above functions need to be used with the YN-622N transceiver.
Yongnuo First Wireless i-TTL Flash Trigger YN-622C is Released now, it's designed for Canon Camera.
Using Digital FSK 2.4GHz frequency band with 7 channels, it has three mode, i-TTL, Manual and RPT, and it can fire flashes at 360 degree direction, the operating range is 100 metres.
It supports FEC, FVL, High-speed Sync, Front Curtain, Rear Curtain, Modeling flash, i-TTL, Manual/RPT, Manual mode, Auto Zooming, AF Lamp.
a),Support Full I-TTL Pass-through function when on camera
1), Mount one YN-622C transceiver into the hot shoe of camera, and mount other transceiver into the hot shoe of flash, you can trigger the flash at any direction in TTL, Manual or RPT mode.
2), Mount flash on hot shoe of YN-622C transceiver on camera, mount the second flash on other transceiver, both of flashes can be trigger at any direction in TTL, Manual or RPT mode.
Note: Speedlites on hot-shoe of transmitter support i-TTL/ Manual / RPT
b), Shutter Sync
1), High-speed Synchronous
The max. sync speed is 1/8000s, but some camera is just 1/4000s, and for those cameras and flashes who don't suport HSS, the sync. speed is just 1/250s or less, different cameras have different Sync speed.
2), Front Curtain Sync
3), Rear Curtain Sync.
c), Remote Control Function
The parameter of flashes on hot shoe of receivers can be set up remotely through the camera manu directly.
d), Supporting mixed mode.
With this function, you can trigger remote speedlites in different modes, set up one YN-622C transceiver on hot shoe of flash in TTL mode, set up the second YN-622C transceiver on hot shoe of flash in manual mode, and the third YN-622C transceiver on hot shoe of flash in multi mode, all three flashes can be fired via the transceiver on hot shoe of camera, this mode is especially useful for those camera bodies without a built-in flash menu.
Note: Only FEC;FVLRatio and Shutter sync can be set in the camera side. Manua and Multi output need to be set on the flash speedlite.
e), Work with Strobe Studio flash light in HSS function
You can buy a PC Sync Cable RF-603 6.35mm cable to connect the transceiver with the studio flash, and then youcan use the non-high speed sync flash to realize higher syc and then you can use them together in HSS. The max. trigger voltage is less than 300 Voltage.
Note: The PC port is for output using only.
f), Awaking function
When half-pressing the shutter button of the camera, the hot shoe flash on the receiver will be awakened. ( for those flash has wake up function )
g), Zoom Function
Zoom Automatic: length will be changed depanding on the changes of lens.
h), Support Single-contact of camera and flash triggering ( the max. Sync. speed is 1/250s )
You can use it with Canon camera or Canon flash, but you just need to set up YN-622C in manual mode.
i), Flash Fire Ratio with I-TTL
You can set up different flash fire ratio and FEC for those flashs on hot shoe of receiver.
j), Support 2pcs AA batteries, ( 1.2v rechargeable battery ), Stand-by time is 60hours.
k), Dimension: 89.5 * 53 * 39MM, net weight is 78g.
Note: There is a PC Sync port for YN-622C transceiver, you can use RF-602 PC / PC Cable to connect it with flash.
ATTENTION: Due to the increased volume of orders during the Black Friday period, same-day dispatch may not be guaranteed. Please allow an additional two days in the usual delivery schedule.All deliveries within Australia are facilitated by Australia Post, Startrack or other courier services depending on the method you select during checkout and the dimensions/weight of the package. Generally, we dispatch within 24 hours of receiving your order unless otherwise stated. We have a quick turnaround time on postage and handling. Tracking numbers are issued via our automated e-mail system, however if you do not receive your tracking number, please message our helpful staff and we'll attempt to provide as much information regarding your order as possible.
Please allow between 2-7 business days for standard deliveries to metro* areas and capital cities. For suburbs outside metro areas please allow an additional 2-5 business days for delivery. *Metro capital cities include: Sydney, Canberra, Wollongong, Gold Coast, Brisbane, Melbourne, Adelaide, Perth, Hobart or Darwin.
All products are covered by an Australian 12 month warranty. This can be either a manufacturer's warranty or a Hypop warranty depending on the product's origin. The warranty covers manufacturers faults, defects, parts and labour. This means that any fault that is deemed to be due to manufacturing will be covered by the warranty for any parts and labour required to fix it. In some cases when the cost of repair outweighs that of a replacement, a suitable replacement product may be offered. These products are not covered by our 12 month warranty as these products are susceptible to regular wear-and-tear and can get damaged for a variety of reasons not deemed as a manufacturer's fault. If these products are faulty or DOA please notify us within 7 days for a replacement. PLEASE NOTE: *This excludes Light Bulbs, Cotton Muslin Backdrops, Paper Backdrop Rolls, Batteries, Consumable Products and Travel Carry Bags included with our kits. DEMO STOCK: All demo stock items are sold 'as-is' and come with a standard 12 month warranty. Stock will either be repaired, substituted with a similar demo item (subject to availability), you may opt for an exchange or a store credit may be offered. Please contact us for further detail.