• PocketWizard MiniTT1 Transmitter (433MHz)
  • PocketWizard MiniTT1 Transmitter (433MHz)
  • PocketWizard MiniTT1 Transmitter (433MHz)
  • PocketWizard MiniTT1 Transmitter (433MHz)
  • PocketWizard MiniTT1 Transmitter (433MHz)
  • PocketWizard MiniTT1 Transmitter (433MHz)
  • PocketWizard MiniTT1 Transmitter (433MHz)
  • PocketWizard MiniTT1 Transmitter (433MHz)
  • PocketWizard MiniTT1 Transmitter (433MHz)
  • PocketWizard MiniTT1 Transmitter (433MHz)
  • PocketWizard MiniTT1 Transmitter (433MHz)
  • PocketWizard MiniTT1 Transmitter (433MHz)
  • PocketWizard MiniTT1 Transmitter (433MHz)

PocketWizard MiniTT1 Transmitter (433MHz)

OUT OF STOCK

The smallest PocketWizard radio ever, the MiniTT1™ Transmitter locks onto the camera’s hot shoe supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units. Remotes can be one or more PocketWizard FlexTT5™ Transceivers connected to Canon E-TTL II flashes or any PocketWizard Receiver for triggering flash or remote cameras. 

The MiniTT1 Transmitter is easy to use; just slide in place and begin to shoot. The new PocketWizard ControlTL™ System interprets the complex E-TTL II data being sent through the camera’s hot shoe and digitally transmits it in a reliable radio signal. Change the flash compensation dial on the camera, and those commands pass seamlessly through the system to your remote flash. Adjust your shutter speed, aperture or ISO and the system corrects for those changes. A ratio command set on the flash or command unit passes through the MiniTT1 to set the remotes. PocketWizard ControlTL radio communication allows you to shoot farther, faster, around corners, through walls even at high noon in bright daylight. Now you can deploy a wireless flash system wherever you want, without infrared limitations, in seconds.

Use the MiniTT1 for standard triggering with any PocketWizard Receiver including the FlexTT5, PlusII or MultiMAX. When used this way with a digital camera, you can take advantage of PocketWizard’s HyperSync Technology that allows up to 1/500th of a second camera sync with many camera/strobe set-ups. HyperSync allows you to advance the timing of your flash trigger so that faster than X-sync speeds can be achieved. 

Need more speed? Push your ControlTL system beyond 1/500th and go into FP/High-Speed sync mode automatically. No buttons to press or settings to change other than your shutter speed will give you flash sync all the way to 1/8000th. 

A new PocketWizard Utility program is provided to support the MiniTT1 via a USB port. The Utility allows you to configure your channel settings, dial in your HyperSync timing, adjust your sleep-mode timers and update your product to the latest firmware.

The PocketWizard MiniTT1 Transmitter is the start of a new era in wireless trigger control.

All deliveries within Australia are facilitated by Australia Post, Hunter Express Couriers or other courier services depending on the method you select during checkout and the dimensions/weight of the package. Generally, we dispatch within 24 hours of receiving your order unless otherwise stated. We have a quick turnaround time on postage and handling. Tracking numbers are issued via our automated e-mail system, however if you do not receive your tracking number, please message our helpful staff and we'll attempt to provide as much information regarding your order as possible.

All products are covered by an Australian 12 month warranty. This can be either a manufacturer's warranty or a Hypop warranty depending on the product's origin. The warranty covers manufacturers faults, defects, parts and labour. This means that any fault that is deemed to be due to manufacturing will be covered by the warranty for any parts and labor required to fix it. In some cases when the cost of repair outweighs that of a replacement, a suitable replacement product may be offered.
*This excludes Light Bulbs, Cotton Muslin Backdrops, Paper Backdrop Rolls, Consumable Products and Travel Carry Bags included with our kits. These products are not covered by our 12 month warranty as these products are susceptible to regular wear-and-tear and can get damaged for a variety of reasons not deemed as a manufacturer's fault. If these products are faulty or DOA please notify us within 7 days for a replacement. We reserve the right to refuse any claims made after this timeframe or additional charges may apply. Damages due to misuse by the user will not be covered by this warranty.

sales@hypop.com.au

Place a phone order : 1300 4 HYPOP (1300 449 767)

Frequently asked questions

Normal Trading Hours

Monday - Thursday : 9am - 5pm

Friday: 9am - 4pm
Saturday: Closed
Sunday: Closed


Copyright © 2017 Hypop. All Rights Reserved. ABN: 87 158 621 268. All prices include GST. Prices on the website exclude delivery charges.

Hypop

Join our Mailing List

Sign up to receive our email updates

Search our store