MeFOTO Roadtrip Convertible Tripod Kit Carbon Fibre - Titanium
OUT OF STOCK
The MeFoto RoadTrip Carbon Fiber Travel Tripod Kit offers a sturdy, compact tripod that extends to 5.1', supports up to 17.6 lb, and folds down to just over 15". The Road trip is actually 2 camera supports in one. A foam-cushioned, removable leg attaches to the center column to convert to full size monopod.
The tripod's legs can be spread independently with two-position leg angle stops. A spring-loaded hook is located in a recess at the bottom of the center column, allowing you to hang a heavy object from it for additional stability.
The ball head offers separate head and pan locks, a 360° pan index, and an integral bubble level. An Arca-Swiss style quick release plate with a 1/4"-20 camera screw is included in the kit, along with a durable carry case with a shoulder strap for storage and transport.
Extendable up to 61.6"
The MeFoto RoadTrip has 5 leg sections, and extends to over 5.0'
Supports up to 17.6 lb
Weighs only 3.1 lb yet strong enough to support a full-sized DSLR. It's an ideal choice mirrorless cameras as well
Converts to Monopod
The removable leg and center column combine to make a full size monopod without tools
The tripod legs can be inverted and folded back 180°. At only 15.4" when folded, this travel friendly tripod can fit inside a back pack or suitcase
Cameras are getting lighter and smaller, and your tripod should be as well
Two Position Leg Angle Stops
For an extra measure of flexibility, tripod legs can be independently locked into place at two different angles to enable shooting in cramped quarters, on uneven terrain or at low camera angles
Foam Grip on Monopod Leg
Provides comfort and safety during long-term use
Rapid Center Column
Uses the same twist-lock system as the legs for fast setup
Recessed Center Column Hook
A spring loaded recessed hook, located in the bottom of the center column, allows you to hang a heavy object from the tripod's center of gravity for increased stability
Five Leg Sections
For a compact design and a wide range of height adjustments
Quick Twist Rubber Lock Grips with Anti-Rotation Leg System
MeFoto's rubberized locking grips combined with anti-rotation legs enable fast and fumble-free setup plus weather and dust resistance
Precision Matched Ball Head
Dual-action heavy duty ball head with Arca-Swiss style compatible quick release plate
360 Degree Panning
Accurate panoramas can be easily accomplished using the graduated panning scale for accurate image alignment
Separate Head and Pan Lock
Individual locking knobs make adjustments easy
Integral Bubble Level
The bubble level allows you to make accurate adjustments for seamless panoramas
Each MeFoto tripod comes with its own carrying case for transport and protection
Material: Carbon fiber and aluminum alloy
Load Capacity: 17.6 lb (8.0 kg)
Maximum Height: Column extended: 61.6" (156.5 cm) @ 24° leg angle
Maximum Height w/o Column Extended: Not specified by manufacturer
Minimum Height: Not specified by manufacturer
Folded Length: 15.4" (39.1 cm)
Center Column: Rapid-type, sliding action, Attaches to leg section to convert to full size monopod
Leg Sections: 5
Independent Leg Spread: Yes
Leg Lock Type: Twist
Center Brace: No
Spiked Feet: No
Weight: 3.1 lb (1.6 kg) including head
Material: Aluminum alloy
Head Type: Ball head
Head Mount Size: 1/4"-20
Quick Release: Yes, Arca-Swiss style, 1/4"-20 Camera plate PU50, included
Panning Range: 360 Degrees with panning Lock
Tilt Range: -45° to +90°
Bubble Level: Yes
Tension Control: No
All deliveries within Australia are facilitated by Australia Post, Hunter Express Couriers or other courier services depending on the method you select during checkout and the dimensions/weight of the package. Generally, we dispatch within 24 hours of receiving your order unless otherwise stated. We have a quick turnaround time on postage and handling. Tracking numbers are issued via our automated e-mail system, however if you do not receive your tracking number, please message our helpful staff and we'll attempt to provide as much information regarding your order as possible.
All products are covered by an Australian 12 month warranty. This can be either a manufacturer's warranty or a Hypop warranty depending on the product's origin. The warranty covers manufacturers faults, defects, parts and labour. This means that any fault that is deemed to be due to manufacturing will be covered by the warranty for any parts and labor required to fix it. In some cases when the cost of repair outweighs that of a replacement, a suitable replacement product may be offered.
*This excludes Light Bulbs, Cotton Muslin Backdrops, Paper Backdrop Rolls, Consumable Products and Travel Carry Bags included with our kits. These products are not covered by our 12 month warranty as these products are susceptible to regular wear-and-tear and can get damaged for a variety of reasons not deemed as a manufacturer's fault. If these products are faulty or DOA please notify us within 7 days for a replacement. We reserve the right to refuse any claims made after this timeframe or additional charges may apply. Damages due to misuse by the user will not be covered by this warranty.