Availability: Ships within 7 days of ordering
The Light Storm LS 1/2w is made of 264 SMD lamp beads that have been designed and manufactured carefully to have over 95 CRI value. Its delicate design and elaborate production make a robust but exquisite housing that can fulfill low forward heat of the fixture. LS 1/2w offers dual power solutions: You can use a V-Mount or Anton Bauer battery for on-location shooting, and an attached adapter is for indoor shooting. The LS 1/2w has the ability to adjust the brightness. Two antennas can cover all the surroundings within 360 degrees. You can also control the brightness of the LS 1/2w by a DMX console, which is under the standard DMX512 protocol. Light Storm: the best choice for your shooting.
- The world's top CRI 98
- Small and slim, the half size of LS 1
- SMD lamp beads bigger beam angle and long lifespan
- Tough and professional aero-aluminum
- Super quiet heat dissipation
- Exceptional light efficiency experience
- Unique light-control separation design
- Dual power solutions
- Tri-way control makes changing lighting setups easier
- User-friendly accessories (U-frame, barn door, hook, diffusing paper, clamp)
|Power Supply||DC 15V|
|Average Lifespan||≥100,000 hours|
|Cooling Mode||Natural convection heat transfer|
|Controller Box (Anton Bauer Battery)||238.0*118.7*48.1mm (*vertical antennas included)|
|Controller Box (V-Mount)||238.0*118.7*59.6mm (*vertical antennas included)|
- Aputure Light Storm LS 1/2w LED light
- Controller box
- AC/DC adapter
- Power cable
- Connecter cable
- Tracing papers x10
- Product manual
All deliveries within Australia are faciliated by Australia Post, Hunter Express Couriers or other courier services depending on the method you select during checkout and the dimensions/weight of the package. Generally, we dispatch within 24 hours of receiving your order unless otherwise stated. We have a quick turnaround time on postage and handling. Tracking numbers are issued via our automated e-mail system, however if you do not receive your tracking number, please message our helpful staff and we'll attempt to provide as much information regarding your order as possible.
All products are covered by an Australian 12 month warranty. This can be either a manufacturer's warranty or a Hypop warranty depending on the product's origin. The warranty covers manufacturers faults, defects, parts and labour. This means that any fault that is deemed to be due to manufacturing will be covered by the warranty for any parts and labor required to fix it. In some cases when the cost of repair outweighs that of a replacement, a suitable replacement product may be offered.
*This excludes Light Bulbs, Cotton Muslin Backdrops, Paper Backdrop Rolls, Consumable Products and Travel Carry Bags included with our kits. These products are not covered by our 12 month warranty as these products are susceptible to regular wear-and-tear and can get damaged for a variety of reasons not deemed as a manufacturer's fault. If these products are faulty or DOA please notify us within 7 days for a replacement. We reserve the right to refuse any claims made after this timeframe or additional charges may apply. Damages due to misuse by the user will not be covered by this warranty.