The Yongnuo RF-603 universal wireless triggers works as a wireless shutter release control - Auto focus, continuous shooting, long exposure, half-way pressing, full-way pressing is supported. Depending on the camera model a shutter release cable is included in the package.
It also acts as a transceiver based system - works as a wireless flash trigger and receiver. Each RF-603 is designed to work as trigger and as receiver. The unit automatically detects the mode it should work in.
As a receiver it fires off-camera flashes from signals sent by the transceiver that's mounted on a camera hot-shoe. Additionally the transceivers PC Sync connector can be used to fire studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") are sold separately.
Wake up function: Mount the transmitter to the camera hot-shoe, connect the receiver with the flash, press half-way the shutter button to wake up the flash at the same time, the green signal light will be bright for some seconds and press the shutter button completely to fire the flash. This "Wake up" function is only supported for flashes which have a sleep mode.
As a trigger the RF-603 can be placed in the cameras hot shoe or if you wish be connected with the camera by a PC Sync cable. You are free to mount an additional flash top-camera. One transceiver can trigger more than 1 flash at the same time. Additional transceivers can be purchased to fire 2 or more flashes.
Wirelessly trigger studio flashes - Using a PC Sync cable the transmitter can wirelessly and synchronously trigger your studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") can be purchased from us.
- Type FSK: 2.4GHz wireless remote system
- Transmitter Distance: 100m
- Channel: 15 different channels and all channels
- Release: Half-way press, full-way press
- Transmitter Port: PC Sync
- Receiver Port: PC Sync, 2.5mm for shutter release
- Time of shooting: Up to 20000 times
- Receiver stand-by time: Up to 45 hours (using AAA batteries)
- Dimensions: 37mm x 30mm x 81.5mm
- Weight: 150g
- 2x Transceivers
- 1x N1 Shutter Release Cable
- 1x User Manual
All deliveries within Australia are faciliated by Australia Post, Hunter Express Couriers or other courier services depending on the method you select during checkout and the dimensions/weight of the package. Generally, we dispatch within 24 hours of receiving your order unless otherwise stated. We have a quick turnaround time on postage and handling. Tracking numbers are issued via our automated e-mail system, however if you do not receive your tracking number, please message our helpful staff and we'll attempt to provide as much information regarding your order as possible.
All products are covered by an Australian 12 month warranty. This can be either a manufacturer's warranty or a Hypop warranty depending on the product's origin. The warranty covers manufacturers faults, defects, parts and labour. This means that any fault that is deemed to be due to manufacturing will be covered by the warranty for any parts and labor required to fix it. In some cases when the cost of repair outweighs that of a replacement, a suitable replacement product may be offered.
*This excludes Light Bulbs, Cotton Muslin Backdrops, Paper Backdrop Rolls, Consumable Products and Travel Carry Bags included with our kits. These products are not covered by our 12 month warranty as these products are susceptible to regular wear-and-tear and can get damaged for a variety of reasons not deemed as a manufacturer's fault. If these products are faulty or DOA please notify us within 7 days for a replacement. We reserve the right to refuse any claims made after this timeframe or additional charges may apply. Damages due to misuse by the user will not be covered by this warranty.