Works as a wireless shutter release control - Auto focus, continuous shooting, long exposure, half-way pressing, full-way pressing is supported. Depending on the camera model a special shutter release cable is included in the package
Transceiver based system - works as a wireless flash trigger and receiver. Each RF-603 is designed to work as trigger and as receiver. The unit automatically detects the mode it should work in. You have the full flexibility out of your gear. As a receiver it fires off-camera flashes which are placed on the hot shoe of the transceiver. Additionally the transceivers PC Sync connector can be used to fire studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") can be purchased from us. Wake up function: Mount the transmitter into hot shoe of the camera, connect the receiver with the flash, press half-way the shutter button to wake up the flash at the same time, the green signal light will be bright for some seconds and then press shutter button completely to fire the flash. This "Wake up" function is only supported for flashes which have a sleep mode. As a trigger the RF-603 can be placed in the cameras hot shoe or if you wish be connected with the camera by a PC Sync cable. In the latter case you are free to mount an additional flash top-camera. One transceiver can trigger more than 1 flash at the same time. You would have to buy additional transceivers for 2 or more flashes, since you need one transceiver as a trigger and one or more transceivers as receivers.
Wirelessly trigger studio flashes - Using a PC Sync cable the transmitter can wirelessly and synchronously trigger your studio strobes. Required cables to 3.5mm (1/8"), 6,35mm (1/4") can be purchased from us.
Specification (each item)
Type: FSK 2.4GHz wireless remote system
Transmitter Distance: 100m
Channel: 15 different channels and all channels
Release: Half-way press, full-way press
Transmitter Port: PC Sync
Receiver Port: PC Sync, 2.5mm for shutter release
Time of shooting: Up to 20000 times
Receiver stand-by time: Up to 45 hours (using AAA batteries)
Dimensions: 37mm x 30mm x 81.5mm
Weight: 2 x 150g
Suitable for Cameras:
Canon 60D, 600D, 550D, 500D, 1000D, 450D, 400D, 350D, 300D
Nearly all flashes with a standard hot shoe and being released by the middle contact are compatible. Please note that the RF-603 only supports the manual flash mode, not TTL, but it works with TTL flashes
Supports the "sleep mode" or "wake up" mode which some flashes are equipped with Canon 580EX II, 580EX, 540EZ, 520EZ, 430EZ, 430EX, 420EX, 420EZ, 380EX; Nikon SB-900, SB-800, SB-28, SB-27, SB-26, SB-25, SB-24
Not compatible with:
Pentax AF-540 FGZ, AF-360 FGZ, AF-400 FT, AF-240 FT
Olympus FL-50, FL36
Fuji Film：S3Pro / S5pro
Nissin, only newer models are compatible, please check before purchase
Sigma EF-500 DG Super, EF-500 DG ST, EF-430
Sunpak Auto 2000DZ, 622 Pro, 433AF, 433D, 383, 355AFm 344D, 333D
Yongnuo YN460, YN462, YN465, YN467, YN468, YN560
2 x Transceivers
1 x Shutter release cable C1
1 x User manual in Chinese and English
All deliveries within Australia are faciliated by Australia Post, Hunter Express Couriers or other courier services depending on the method you select during checkout and the dimensions/weight of the package. Generally, we dispatch within 24 hours of receiving your order unless otherwise stated. We have a quick turnaround time on postage and handling. Tracking numbers are issued via our automated e-mail system, however if you do not receive your tracking number, please message our helpful staff and we'll attempt to provide as much information regarding your order as possible.
All products are covered by an Australian 12 month warranty. This can be either a manufacturer's warranty or a Hypop warranty depending on the product's origin. The warranty covers manufacturers faults, defects, parts and labour. This means that any fault that is deemed to be due to manufacturing will be covered by the warranty for any parts and labor required to fix it. In some cases when the cost of repair outweighs that of a replacement, a suitable replacement product may be offered.
*This excludes Light Bulbs, Cotton Muslin Backdrops, Paper Backdrop Rolls, Consumable Products and Travel Carry Bags included with our kits. These products are not covered by our 12 month warranty as these products are susceptible to regular wear-and-tear and can get damaged for a variety of reasons not deemed as a manufacturer's fault. If these products are faulty or DOA please notify us within 7 days for a replacement. We reserve the right to refuse any claims made after this timeframe or additional charges may apply. Damages due to misuse by the user will not be covered by this warranty.