PocketWizard FlexTT5-Canon Transceiver (433MHz) For Canon Nikon

PocketWizard FlexTT5-Canon Transceiver (433MHz) For Canon Nikon

Availability: In stock (4 Day Lead-Time)

* Required Fields



The dedicated FlexTT5™ Transceiver, with its built in hot-shoe and ControlTL™ firmware, is the perfect addition to Canon E-TTL II flash systems. The FlexTT5 takes the existing benefits of Canon wireless systems beyond the boundaries of infrared technology. When paired with the Mini TT1™Transmitter or another FlexTT5 Transceiver, a whole new world of wireless flash freedom opens up. The FlexTT5 is also the perfect Transceiver for your manual triggering needs and works with all MultiMAX channels and many of the MultiMAX advanced functions.

The FlexTT5’s simple design comes to life through its hot-shoe connection with a camera or flash. Mount a flash or command unit on the FlexTT5 to use the same zone controls and ratio commands as you would normally. The system tracks your changes in ISO, shutter speed and aperture and reacts accordingly to make sure exposures stay right on target. Use the flash compensation dial on your camera or flash just as you would normally and the changes pass seamlessly through the system.

The FlexTT5 has two channel configuration settings; C1 and C2. Each can be programmed as needed with up to 20 ControlTL channels* for TTL photography, or 32 standard channels** for manual flash photography. The FlexTT5 Transceiver also has a three-zone selector switch for ease of use with Canon zones and ratios.
* - 20 ControlTL channels for FCC/IC 344 MHz radios and three ControlTL channels for CE 433 MHz radios.
** - 32 Standard channels for FCC/IC 344 MHz radios and 35 Standard channels for CE 433 MHz radios.
With PocketWizard's patent pending HyperSync™ Technology, the FlexTT5 allows you to use sync speeds beyond your camera's x-sync, up to 1/8000th of a second with some camera/strobe combinations, giving you the control you've always been looking for. With ControlTL Firmware Upgrade 6.0, HyperSync is automated and HyperSync timing is now adjusted in two seperate places - on the transmitter and on the receiving ControlTL radio. The transmitting or on-camera MiniTT1 or FlexTT5 automatically adjusts HyperSync to compensate for changes made to shutter speed. Photographers can further refine HyperSync via the PocketWizard Utility. Learn more HyperSync Automation at wiki.pocketwizard.com/hypersync.
You can also use your camera's FP/High-Speed sync mode with Canon Speedlites with the convenience and freedom of radio reliability. Now you can use any shutter speed or f-stop you want no matter where you place your flash.

The FlexTT5 also has our Auto-Sensing Transceiver Technology that enables it to switch back and forth between Transmitter and Receiver modes as needed for greater flexibility on the job. When a hot-shoe or other trigger is detected, it automatically switches to Transmitter mode. With Auto Relay Mode you can easily trigger a remote camera in sync with remote flash. Put a camera where you can’t be and use remote TTL or non-TTL lighting at the same time. Expand your coverage and increase your creativity.




CE model: 433.42 – 434.42 MHz


32 channels

1-16 standard channels  
17-32 selective Quad-Zone Triggering channels  
Reverse compatible with all PocketWizard radios of the same frequency* using standard or Quad-Zone Triggering channels (*FCC and CE PocketWizard radios work on different frequencies)


A – B – C – D  
Compatible with other PocketWizard radios with Quad-Zone Triggering channels


Precision tuned internal coil


Backlit 2.5cm (1.0”) liquid crystal display (LCD)


Up to 500 meters (1600 feet)  
(actual range is dependent on multiple factors including equipment, mode, environment, positioning, orientation and interference)

Sync Speed

Up to 1/250 for focal plane shutters  
Up to 1/500 for leaf shutters

Triggering Speed

Up to 14.5 FPS

Contact Time

62 milliseconds in normal operation  
2 milliseconds in High Speed Receive (HSR) Mode

Status Indicator

LED: Green, Amber, Red status indications

Transmit Output Power

Less than 1 milliwatt (0.001 watt)


Two (2) AA (IEC:LR6) alkaline recommended  
NiMH, NiCAD, NiZn, Lithium acceptable (these chemistries may not report battery life accurately)  
USB (optional AC adapter PW-AC-USB available)

Battery Life

Up to 50 hours (with alkaline batteries)

Max Port Sync Voltage

300 Volts (Camera/Flash Port)

Max Current Handling

1.0 A peak, 0.2 A (1/5 Amp or 200 milliamp) continuous current limited

Voltage Present

3 volts, safe for use with all digital and film cameras


USB 2.0 Mini-B Connector


High impact plastic with captive battery door


120 grams (4 ounces) with batteries installed


Height: 13.3 cm (5.25”)  
Width: 5.1 cm (2.00”)  
Depth: 3.2 cm (1.25”)

Operating Temperature

Above -15° C (5° F) and below 50° C (120° F).

* Specifications subject to change by the manufacturer without notice



All deliveries within Australia are faciliated by Australia Post, Hunter Express Couriers or other courier services depending on the method you select during checkout and the dimensions/weight of the package. Generally, we dispatch within 24 hours of receiving your order unless otherwise stated. We have a quick turnaround time on postage and handling. Tracking numbers are issued via our automated e-mail system, however if you do not receive your tracking number, please message our helpful staff and we'll attempt to provide as much information regarding your order as possible.


All products are covered by an Australian 12 month warranty. This can be either a manufacturer's warranty or a Hypop warranty depending on the product's origin. The warranty covers manufacturers faults, defects, parts and labour. This means that any fault that is deemed to be due to manufacturing will be covered by the warranty for any parts and labor required to fix it. In some cases when the cost of repair outweighs that of a replacement, a suitable replacement product may be offered.

*This excludes Light Bulbs, Cotton Muslin Backdrops, Paper Backdrop Rolls, Consumable Products and Travel Carry Bags included with our kits. These products are not covered by our 12 month warranty as these products are susceptible to regular wear-and-tear and can get damaged for a variety of reasons not deemed as a manufacturer's fault. If these products are faulty or DOA please notify us within 7 days for a replacement. We reserve the right to refuse any claims made after this timeframe or additional charges may apply. Damages due to misuse by the user will not be covered by this warranty.


Write Your Own Review

You're reviewing: PocketWizard FlexTT5-Canon Transceiver (433MHz) For Canon Nikon

Ask A Question

Place a phone order:
1300 4 HYPOP (1300 449 767)
Monday - Thursday : 9am - 5pm
Friday: 9am - 4pm
Saturday: Closed
Sunday: Closed

Please wait...

{{var product.name}}
has been added to your cart
Continue shopping