Hypop GoPro 35 in 1 Accessory Kit for Head Chest & Cycling with 3M Adhesive Set features the following:
Chest Belt Harness Mount
An adjustable elastic belt with high comfort, the perfect fit for Gopro wearable cameras. The harness adjusts from 60-100cm. Made from ABS plastic, it comes in black.
Head Strap Mount
This strap is mount adjustable & is compact design. Made of superior plastic & nylon, it is specially designed for GoPro HD Hero 1/2/3/3+/4 & our SJ action camera range.
*Not included is the waterproof shell/housing case.
Vented Helmet Strap Mount
Fully Adjustable to fit all sizes, the Head Strap is compatible with all GoPros & our SJ action camera range. The one size fits all adjustable head strap mount allows for use on your head or on your helmet. Made with Nylon Straps and Polycarbonate buckles it has an adjustable size of 50-60cm width & a 17-29cm height.
* NOT RECOMMENDED for high-impact sports - non-impact activities only.
7cm Diameter Base Suction Cup
Compatible with the entire GoPro & our SJ action camera range, you can use the vacuum suction cup to install your GoPro cameras on your car dashboard or windshield for easy operation while driving.
Handlebar Bike Adjustable Mount
Lightweight & portable it fits handle bars from about 30-32mm. Weighing in at a super light 45g, this won't effect your cycling. The maximum load is approx 3 kg & is made of aluminum.
J Hook Buckle Quick Release Mount
A good choice for your chest belt strap & helmet. It is easy to operate, easy to install & easy to remove. Safely secure your GoPro & SJ action camera on a vertical wall surface like a car bumper, wall, back of helmet or similar.
Bicycle Handlebar Seatpost Clamp with Three-way Adjustable Pivot Arm
Attach your GoPro or SJ action camera to handlebars,seatposts,ski poles etc. It fits 1.9cm - 4cm diameter tubes. You can also clamp to chainstays,small roll bars,bolt-heads,windsurfing and kitesurfing control bars, or even use to create a handheld boom - any pole that is in the size range above. This comes with pivoting orientation arms allowing for 3-way adjustability, ensuring you can get the angle you want.
Tripod Mount Adapter
This Tripod Mount is compatible with all GoPro & SJ action cameras. The mount attaches your quick release GoPro camera to any standard, fast & without fuss. It is super easy to install - simply screw the mount onto the 1/4" thread of your tripod/monopod. This can also be used with Gorillapod tripod, monopod, suction cup mount attached to a car, an extendable boom, camlapse, or any 1/4" thread.
* NOTE: THIS IS NOT COMPATIBLE with the Digital Hero5 wrist camera.
Universal Long & Short Straight joint Mount
This section applies to GOPRO sport camera accessories Hero1/2/3/Suptig sport DV, it is a universal standard accessory, made of plastic & stainless steel. In order to the length of the link associated with universal fittings for connections on the waterproof case, mounted on a bicycle is fixed on a tripod, a plurality of directions to achieve a turning point, adjusting direction. Connect the metal parts made of stainless steel, even in the water - it will never rust.
3M Sticker Adhesive Pads
Easily attach your GoPro to curved & flat surfaces with these industrial strength waterproof adhesive mounts. They can be removed by heating the adhesive bond with a hair dryer then peeling off the mount.
Buckle Flat Basic Strap Mount
This is made of plastic & metal, it is durable & convenient to uss on a curved or flat adhesive mount.
Camera Tethers Safety Buckle
This tether attaches to the camera housing's backdoor & the adhesive anchors attach to your gear. Use your GoPro Camera in extreme conditions - a must have accessory for water sports. Extra strong industrial 3M adhesive material.
- 1 x Chest Body Strap with 1 x 3-way adjustment base
- 1 x Head Strap
- 1 x Helmet Strap
- 1 x Suction Cup
- 1 x Bicyle Seatpost Clamp with 1 x Three-way Adjustbale Pivot Arm
- 1 x Tripod Mount
- 1 x Aluminum Handlebar Mount with Screw Tool
- 4 x Buckle Basic Mount
- 4 x Long Screws
- 1 x Short Screw
- 2 x J-hood Mount
- 1 x Long & Short Straight Joint
- 2 x Round Flat Mounts with 2 x adhesive pads
- 2 x Square Curved Mounts with 2 x adhesive pads
- 3 x Flat 3M sticker
- 3 x Arc 3M sticker
- 2 x Camera Tether
- 1 x Storage Bag
All deliveries within Australia are faciliated by Australia Post, Hunter Express Couriers or other courier services depending on the method you select during checkout and the dimensions/weight of the package. Generally, we dispatch within 24 hours of receiving your order unless otherwise stated. We have a quick turnaround time on postage and handling. Tracking numbers are issued via our automated e-mail system, however if you do not receive your tracking number, please message our helpful staff and we'll attempt to provide as much information regarding your order as possible.
All products are covered by an Australian 12 month warranty. This can be either a manufacturer's warranty or a Hypop warranty depending on the product's origin. The warranty covers manufacturers faults, defects, parts and labour. This means that any fault that is deemed to be due to manufacturing will be covered by the warranty for any parts and labor required to fix it. In some cases when the cost of repair outweighs that of a replacement, a suitable replacement product may be offered.
*This excludes Light Bulbs, Cotton Muslin Backdrops, Paper Backdrop Rolls, Consumable Products and Travel Carry Bags included with our kits. These products are not covered by our 12 month warranty as these products are susceptible to regular wear-and-tear and can get damaged for a variety of reasons not deemed as a manufacturer's fault. If these products are faulty or DOA please notify us within 7 days for a replacement. We reserve the right to refuse any claims made after this timeframe or additional charges may apply. Damages due to misuse by the user will not be covered by this warranty.